Interface Selection - Epson EX-1000 User Manual

Interface Selection

The type of interface and the type of parity check for a serial interface
are set with DIP switches 2-5 and 2-6:
Table E-4. Interface type
DIP switches 2-7 and 2-8 determine the baud rate when the built-in
serial interface is used. They have no effect on any optional interfaces,
or on the built-in parallel interface. Therefore, if you use the serial
interface only occasionally, you can still leave these switches set as you
want them.
Table E-5. Baud rate for built in interface
Note: Shaded items are the factory settings.
Defaults and DIP Switches
E - 5