Epson EX-1000 User Manual page 32

Clear enough space around the printer so that the paper has an
unobstructed path in and out of the printer. There are three common
methods of arranging a printer and continuous paper:
Using a printer stand with the paper stacked underneath it.
l
Using a desk or table as a stand, with the printer near the rear edge
l
and the paper on the floor or on a shelf.
Putting the printer on a desk or table and stacking the paper behind
l
the printer.
Now follow these steps to load continuous paper in your EX.
1. Install the paper rest by fitting its hooks into the notches at the back
of the printer, as shown in Figure 2-1. This prevents incoming paper
from catching on the cable.
2. Remove the dust cover and move the print head to about 40 on the
ruler on the paper bail.
3. Pull the paper bail and paper release levers forward.
4. Release the sprocket units by pushing the locking levers back, as
shown in Figure 2-2.
Figure 2-l.
Installing the paper rest
Choosing and Loading Paper
Figure2-2.
Releasing the sprocket units
Locking
lever
2-3