ESC j
Format:
Comments:
Reverses the paper by n/216 of an inch. Note that ESC j should not
be used near the end of the paper or when printing self-adhesive
labels. If the automatic sheet feeder is selected, this command is
ignored.
Vertical tabbing
VT
Format:
Comments:
Advances the paper to the next tab setting in the channel selected by
ESC /. If no channel has been selected, channel 0 is used. If no
vertical tabs have been selected, the paper advances one line.
ESC B
Format:
Sets up to 16 vertical tabs in the current line spacing. Tab settings are
not affected by subsequent changes in line spacing. The tab settings
are entered as nl, n2, etc., all from 1-255, in ascending order. The
NUL character indicates the end of the command. All settings are
stored in channel 0 (see ESC b). ESC B NUL clears the tab settings.
A-18
Perform n/216-inch Reverse Line Feed
Tab Vertically
set Vertical Tabs
Command Summary