Heat Sink - HP 6930p - EliteBook - Core 2 Duo 2.8 GHz Maintenance And Service Manual

configurations, battery fast charging, and software requirements. Exhaust air is displaced through the
ventilation grill located on the left side of the computer.

Heat sink

NOTE: The heat sink spare part kits include replacement thermal material.
Description
For use only with computer models with discrete graphics subsystem memory
For use only with computer models with UMA graphics subsystem memory
Before removing the heat sink, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following.
a. Keyboard (see
b. Switch cover (see
c. Fan (see
Remove the heat sink:
NOTE: Steps 1 through 5 apply only to computer models equipped with discrete graphics subsystem
memory. See steps 6 through 8 for removing the heat sink on computer models with UMA graphics
subsystem memory.
1. Following the 1, 2, 3, 4 sequence stamped into the heat sink, loosen the four Phillips PM2.5×11.0
captive screws (1) that secure the heat sink to the system board.
Battery on page
Keyboard on page
Switch cover on page
Fan on page 70)
44).
58)
67)
Component replacement procedures
Spare part number
483011-001
483012-001
71