Expansion Memory Module - HP 6930p - EliteBook - Core 2 Duo 2.8 GHz Maintenance And Service Manual

Expansion memory module

Description
4096-MB memory module (PC2-6400, 800-MHz, DDR2)
2048-MB memory module (PC2-6400, 800-MHz, DDR2)
1024-MB memory module (PC2-6400, 800-MHz, DDR2)
Before removing the expansion memory module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
Remove the memory module:
1. Position the computer with the front toward you.
2. Loosen the Phillips PM2.0×5.0 captive screw (1) that secures the memory module compartment
cover to the computer.
3. Lift the left side of the cover (2), swing it up and to the right, and remove the cover. The memory
module compartment cover is included in the Plastics Kit, spare part number 487429-001.
4. Spread the retaining tabs (1) on each side of the memory module slot to release the memory
module. (The edge of the module opposite the slot rises away from the computer.)
Battery on page 44).
Spare part number
483195-001
483194-001
483193-001
Component replacement procedures 55