Diagnostics Menu - HP 6930p - EliteBook - Core 2 Duo 2.8 GHz Maintenance And Service Manual

Select
DriveLock Passwords
Automatic DriveLock
Disk Sanitizer
System IDs
Always Prompt for HP SpareKey
Enrollment

Diagnostics menu

Select
System Diagnostics menu
To do this
●
Enable/disable DriveLock on any computer hard drive (enabled by default).
●
Change a DriveLock user password or master password.
NOTE: DriveLock settings are accessible only when you enter Computer Setup by turning
on (not restarting) the computer.
Enable/disable Automatic DriveLock support.
Run Disk Sanitizer to destroy all existing data on the primary hard drive.
CAUTION: If you run Disk Sanitizer, the data on the primary hard drive is destroyed
permanently.
Enter a user-defined computer asset tracking number and ownership tag.
Enable/disable a prompt for HP SpareKey enrollment.
To do this
●
F1 System Information—Displays the following information:
◦
Identification information for the computer and the batteries in the system.
◦ Specification information for the processor, cache and memory size, system
ROM, video revision, and keyboard controller version.
●
F2 Start-up Test—Verifies the system components needed for starting the computer.
● F3 Run-In Test—Runs a comprehensive check on system memory.
●
F4 Hard Disk Test—Runs a comprehensive self-test on any hard drive in the
system.
Computer Setup menus 99