Brother XR1300 Operation Manual page 97

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
i Make sure you guide the thread through the
thread take-up lever from right to left as
shown in the illustration below.
Sewing is possible only if the thread is securely
hooked on the thread take-up lever.
a Thread take-up lever
• Make sure that the thread is securely hooked
on the thread take-up lever.
j Put the thread behind the needle bar thread
guide above the needle.
The thread can easily be passed behind the
needle bar thread guide by holding the thread
in your left hand, then feeding the thread with
your right hand.
a Needle bar thread guide
k Thread the needle according to steps
n
in "Upper threading" (page 26) or steps
through
models equipped with the needle threader)"
(page 26).
1
i
in "Using the needle threader (for
m
and
b
4
95