Selecting A Stitch - Brother XR1300 Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Selecting a stitch

Using the stitch selection keys, select the desired
stitch.
When the sewing machine is turned on, the straight
stitch ( left needle position) is selected.
a Turn on the sewing machine.
b Confirm that the utility stitch indicator is lit. If
it is not lit, press the stitch category selection
key as many times as necessary until the utility
stitch indicator is lit.
a Stitch category selection key
b Utility stitch indicator
Memo
● When you want to select the mirror image
stitch, press the stitch category selection key
as many times as necessary until the mirror
image stitch indicator is lit.
a Mirror image stitch indicator
c Press (stitch selection keys). The
number of the selected stitch is displayed.
Press the "+" or "–" side of
reduce the number by one. Pressing
right changes the digit on the right and pressing
on the left changes the digit on the left.
The stitch is selected.
d Attach the presser foot indicated in the LCD.
a Presser foot type
• For details, refer to "Replacing the presser
foot" (page 34).
Memo
● The presser foot to be used is indicated by
the letter (J, A, etc.) that appears above or
beside the stitch number.
e If necessary, adjust the stitch length and
width.
• For details on sewing with each of the stitches,
refer to the following example.
to increase or
on the
2
37