Patchwork (Crazy Quilt) Stitching; Piecing - Brother Simplicity SB3129 Operation Manual

Users manual - english
Hide thumbs Also See for Simplicity SB3129:
Table of Contents

Advertisement

Patchwork (crazy quilt)
stitching
1
Fold the edge of the top piece of fabric and
place it over the lower piece.
Sew the two pieces of fabric together so the
2
pattern spans over both pieces.

Piecing

Sewing together two pieces of fabric is called
"piecing". The fabric pieces should be cut with a
6.5 mm (1/4 inch) seam allowance.
Sew a piecing straight stitch 6.5 mm (1/4 inch) from
either the right side or the left side of the presser foot.
1
Baste or pin along the seam allowance of the
fabric that you wish to piece together.
2
Attach zigzag foot "J".
• For details, refer to "Replacing the presser
foot" (page 37).
57
3
Select stitch
• For details, refer to "Selecting stitching"
(page 68).
J
58
or
.
4
Sew with the side of the presser foot aligned
with the edge of the fabric.
■ For a seam allowance on the right side
Align the right side of the presser foot with the
edge of the fabric, and sew using stitch
1 6.5 mm (1/4 inch)
■ For a seam allowance on the left side
Align the left side of the presser foot with the
edge of the fabric, and sew using stitch
1
1 6.5 mm (1/4 inch)
Memo
● To change the width of the seam allowance
(the needle position), adjust the stitch width.
Appliqué, Patchwork and Quilt Stitching
57
.
1
58
.
95
3

Advertisement

Table of Contents
loading

This manual is also suitable for:

885-s61

Table of Contents