Download  Print this page

Securing The Stitching - Brother Simplicity SB3129 Operation Manual

Users manual - english.
Hide thumbs

Advertisement

Securing the stitching

When sewing with the straight stitch, for example, at
the end of an opening or where seams do not
overlap, use reverse stitching or reinforcement
stitching to secure the end of the thread.
1
Lower the needle into the fabric at the
beginning of the stitching, and then lower the
presser foot lever.
2
Press
(start/stop button) or press down
on the foot controller.
At this time, if the start/stop button is held
pressed, the machine sews at a low speed.
1
1 Start/stop button
• For details, refer to "Starting to sew"
(page 49).
The machine starts sewing.
3
After sewing 3 to 5 stitches, press
(reverse/reinforcement stitch button).
Keep the reverse/reinforcement stitch button
held down until you reach the beginning of the
stitching.
1
1 Reverse/reinforcement stitch button
While the reverse/reinforcement stitch
button is held pressed, reverse stitches are
sewn.
4
After sewing back to the beginning of the
stitching, release the reverse/reinforcement
stitch button.
The machine stops sewing.
Press
(start/stop button), or press down
5
on the foot controller.
The machine starts sewing in the normal
sewing direction.
6
When the end of the stitching is reached,
press
(reverse/reinforcement stitch
button).
Keep the reverse/reinforcement stitch button
held down until 3 to 5 reverse stitches are
sewn.
While the reverse/reinforcement stitch
button is depressed, reverse stitches are
sewn.
2
Sewing
51

Advertisement

Table of Contents

   Also See for Brother Simplicity SB3129

   Related Manuals for Brother Simplicity SB3129

This manual is also suitable for:

885-s61

Comments to this Manuals

Symbols: 0
Latest comments: