Locating Inputs And Outputs - Sony BRAVIA KDL-32BX300 Operating Instructions Manual

Locating Inputs and Outputs
Rear Panel
if}
[] DIGITAL AUDIO Connects to the optical audio input of digital audio equipment that is PCM/Dolby*
OUT (OPTICAL) Digital compatible.
[] cABLE) RF inpui {hai connec{s {o your CaNe or VHF/UHF an{ennal ........................................................
ANTENNA
[] COMPONENT Component video provides better picture quality than the composite video.
IN 2 Audio connection is required for the COMPONENT IN ports, connect audio (L/R).
(1080p/1080i/
720p1480p1480i)l
R-AUDIO-L
[] viDE0 iN/ Tbis inpui pori can be used asa composiie video inpui iViDE()i or asa componeni
COMPONENT video input (COMPONENT 1). For composite use, connect the yellow jack to Y for
IN 1 video and use audio L (mono) and R for audio signal. For component connection,
(1080p/1080i/ use Y, PB, PR for video signals and also connect the audio L (mono) and R for audio
720p/480p/480i)/signal.
This TV can auto detect and switch between the VIDEO and COMPONENT 1
R-AUDIO-L
when VIDE() or COMPONENT 1 is connected.
(MONO) To set to auto detection, press MENU, then select the Setup settings. Select the
Video/Component 1 Selection option then set to Auto.
* Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
(Cotzfitzued) 7