Sony BRAVIA KDL-32BX300 Operating Instructions Manual page 53

BRAVIA Sync
Cannot find connected • Make sure that the Control for HDMI is set up on both the TV and the
BRAVIA Sync HDMI optional device compatible with BRAVIA Sync (see page 23).
device
Second A/V receiver is not • Only one A/V receiver may be used with the BRAVIA Sync and
listed on the Device List Control for HDMI functions at one time (see page 39).
PC Input
No picture / No signal • Confirm the PC is correctly connected to the TV with either the PC IN
(with an HDI5 cable) or with the HDMI IN.
• Ensure the output signal from the PC is one of the formats listed on page
42.
• Turn the PC off. Confirm the PC connection and restart the PC. Plug-and-
play will auto-detect the TV and correctly set up PC timing.
• Verify the PC is not in standby or hibernation mode.
Poor Picture • Adjust the resolution (see page 42).
• Adjust Pitch and Phase.
General
TV screen feels warm • Due to the thin profile of this television, the heat generated by the LCD
panel backlight and supporting electronics will be more noticeable. This
is normal operation and not a cause for concern.
Wide Mode changes • The current Wide Mode setting is automatically replaced with the 4:3
automatically Default setting when you change the channel or video input, if 4:3
Default in the
Screen
settings is set to other than Off. If you want to
lock in Wide Mode selected with WIDE on the remote control, set 4:3
Default to Off in the
Screen
settings (see page 31 ).
• Check the Auto Wide option in the
Screen
settings (see page 31 ).
Suddenly the picture gets • The picture gets smaller during the commercials due to the method in
smaller which the provider broadcasts their content. When HD content channels
switch to SD content (commercials), the picture may be small with a
black border.
• Auto Wide will not expand the picture during these content changes siuce the
content infonnation is regulated by the channel signal provider. You can
manually change the Wide Mode if you prefer (see page 24). This setting
will remain in effect until you chauge the chauuel or iuput or mauually chauge
the Wide Mode agaiu.
"Black box" on screen • You have selected a text option and no text is available (see page 37). To
turn off this feature, set the CC Display option to Off. If you were
trying to select closed captioning, select CC1 instead of Text1-4.
C3
o_o
_Comit_uec5 53