Sony BRAVIA KDL-32BX300 Operating Instructions Manual page 49

Step 5: Preparing the TV for wall mount installation
Follow the steps below to prepare for installing the TV.
1 Disconnect all the cables from the TV.
2 Align the holes on the left Mounting Hook with the corresponding holes on the rear of the TV.
Secure them to the TV using two screws (supplied with SU-WL100).
Screw
_ (+PSW 4 x 12)
J Hook
Hook locations diagram
Install the TV onto the location "b" of the Base Plate.
C3
3
Adjust the angle of the Mounting Hook.
Mounting Hook
49