Sony BRAVIA KDL-32BX300 Operating Instructions Manual page 45

Step 3: Installing the Base Bracket on the wall
Refer to the Instructions for SU-WL500.
Step 4: Preparing the TV for wall mount installation
Follow the steps below to prepare for installing the TV.
Disconnect all the cables from the TV.
1
2
Secure the Mounting Hook to the rear of the TV.
Determine the screw locations and secure the Mounting Hooks to the rear of the TV. Refer to
the "Screw and Hook Locations Diagram/Table" shown below.
10) Secure the Mounting Hooks to the rear of the TV using only the supplied screws
(M6 x 16).
O Be sure to tighten the screws with equal torque strength.
Square
hole
Screw
(M6 x 16)
Mounting Hook
Screw and Hook Locations Diagram/Table
Tab
Align the tab
on the rear of
the Mounting
Hook with the
[o square hole
on the rear of
the TV as
illustrated.
(Cot_tit_ued)
45