Sony Handycam CCD-FX520 Operation Manual page 36

To Replace Recording on a Tape (Insert Editing)
You can insert a scene from a tape on a VCR into your originally recorded tape by setting the starting point and
ending point•
i
n 4,
a
a
[a] [b]
Before starting insert editing, set your VCR to the playback pause mode at the beginning of the scene to be
recorded. (1) On your camcorder, locate the point where the insert should end by pressing <1<1or _ after
pressing playback [b]. (2) At the end point,press COUNTER RESET to set the counter to zero. (3) Locate the
point where you want to start the insertionby pressing_ and press II to pause [a]. (4) Slide • to set the
camcorder into recording pause mode. The picture in the viewfinder screen switches to the VCR tape. (5)
Press ZERO MEM to stop recording at the counter's zero point. (6) Press II on the camcorder and the VCR to
start insert editing. You can monitor the picture being inserted in the viewfinder screen. The insert recording will
stop automatically near the zero 3oint on the camcorder's counter.
PLAY REW[_ _FF
3
REW [_ PAUSE
RE W (_)-- PLAY--_ FF
STOP PAUS_ eREC
011
_- :00:2_
To Change the End Point
36
Press ZERO MEM so that the ZERO MEM indicatordisappears, and begin again from step 1.