Sony Handycam CCD-FX520 Operation Manual page 22

You can use th_s camcorder as a VCR by connecting Jtto you_ TV for playback There are two ways to
connect your camcorder.
• Connecting to a TV or VCR w_th video/audio tnput jacks
• Connecting to a TV or VCR without wdeo/audto input jacks
We recommend you to use house current for indoor use of the camcorder (p. 25)
Conne_t|ng to a 't_ or_/_FI without
Vi_eo_'_u_(_ _lipU_ , Ja_s
Connect the camcorder to the TV or VCR using the supphed RFU adaptor Set IN/OUT to OUT (p. 43). Set the
channel selector on the RFU adaptor and your TV channel to VHF channel CH 3 or CH 4, whichever is not
active in your area
VHF/UHF
3CH _'O--_v 4OH 1 RFU-90UC
:Signal flow
_ANT
VHF
O
J
• :_i_neb_[_'rlg t o ii Tv or VCR wl_ VldeolAudio Input Jacks
Connect the camcorder to your TV or VCR by using the appropriate AV connecting cable (not supphed)
If your TV or VCR _sa monaural type, use the VMC-710M/720M AV connecting cable
If your TV or VCR is a stereo type, use the VMC-910MS/920MS AV connecting cable Or using the VMC-
710M/720M AV connecUng cable, connect its audio plug to the audio L jack of your TV or VCR
Set IN/OUT on the camcorder to OUT (p 43) Set the TV/VCR selector to VCR on the TV. When connecting
the camcorder to a VCR, set the input selector on the VCR to LINE
22
:Signal flow
VIDEO
VIDEO IN
VMC-710M/720
AUDIO o
VIDEO _
1