Various Playback Modes
To View a Still Picture
(Playback
Pause)
Press II during playback. To resume playback, press II or D.
To Locate a Scene (Picture Search)
Keep pressing
-41<1or I_
during
playback.
To resume
normal
playback,
release
the button.
To Monitor the High-speed
Picture During Fast-forward or Rewind (Skip Scan)
Keep pressing
<!,4 while
rewinding,
or _
while advancing
the tape. To resume
normal playback,
press D.
To View the Picture
in a Sequence
of Stop-motion
Images
Press EDITSEARCH repeatedly in playback pause mode. If you keep pressing EDITSEARCH, you can view
the playback picture forward (+) or in reverse (-).
To View the Picture
at 1/5 Speed
(Slow Playback)
(Only With the Commander)
Press I1_ of the Remote Commander (p.46) during playback. To resume normal playback, press E>. When
slow playback lasts for about 1 minute, it shifts to the normal playback speed automatically.
Notes on playback
• Streaks may appear and the sound may be muted depending on playback mode.
• When still picture mode lasts for about 5 minutes, the camcorder automatically stops.
To display
the viewfinder
screen
indicators
on a TV
Press DATA SCREEN
on the Remote
Commander.
To erase the indicators,
press DATA SCREEN
again.
To use the supplied
Remote Commander
tor p_ayback
and camera
recording,
do the followings:
(1) Insert
supplied
two size AA (R6) batteries
with correct
polarity.
(2) Set [] REMOTE
COMMANDER
on the battery
mounting
surface
of the camcorder
to ON.
2
OFF! ION
Notes
on the Remote
Commander
• Keep the remote sensor away from strong light such as direct sunlight or illumination,
Remote control with
the Remote
Commander
may not be effective.
• Command
mode of the Remote
Commander
is VTR2. Avoid using the Sony VCRs with the same command
mode at the same
time.
24