Creating A Color Profile - Epson CPD-8407 User Manual

Creating a Color Profile

To make a color profile, you must use the calibration sheet you
printed in the previous section. Make sure your Color Calibrator
has been calibrated as described in "Calibrating the EPSON Color
Calibrator" on page 3-2, then follow the steps below:
1. Place the calibration sheet you printed in the previous section
on a flat surface, with the included black base paper behind it.
Note:
Wait for at least 30 minutes after printing a calibration sheet before
using it to create a color profile.
2. Select an empty block in the EPSON Printer Calibrator dialog
box by clicking it with your mouse.
3. Place the sensor tip of the calibrator on the corresponding
block of the calibration sheet.
Note:
Make sure the sensor tip is placed flat and firmly on the sheet.
3-8
Calibrating Your Printing System