Table of Contents
Advertisement
The following dialog box appears:
number of steps
between 0% and 100%
Before measuring the custom chart, you need to enter
information about the chart in this dialog box.
3. Enter the number of color density steps between 0% and 100%
in your chart. If there are four or more steps, type 4.
4. Enter the density percentage for each step in the boxes as
shown below. If your sample has more than six total steps,
choose four suitable steps.
percentage of color density for each step
5. After you finish making the settings, click Apply.
6. Follow the steps under "Preparing to measure the standard
color chart" on page 4-1 from step 5. Then follow the steps
under "Measuring the chart and updating the profile" on
page 4-4
Calibrating Your System to Another
4
4-7
Advertisement
Table of Contents
