Epson CPD-8407 User Manual page 35

5. Click the Calibration button.
6. Place the color pad packed with your calibrator on a flat
surface. Place the sensor tip of the calibrator on the color pad's
black circle.
Note:
Make sure the sensor tip is placed flat and firmly on the pad.
7. Click the Calibration button, or press the measure button at
the top of the calibrator to measure the color.
Note:
Do not measure the pad under strong light or direct daylight as this
may render the measurement inaccurate.
After you finish measuring the black circle, the message in the
window changes to Please calibrate white point.
8. Place the sensor tip on the color pad's white circle. Repeat step
7 to measure the color.
9. After you finish measuring the white circle, click the Done
button.
You're now ready to measure the color chart. See the next section
for instructions.
Calibrating Your System to Another
4
4-3