Areas Are Missing In The Printed Image; Completely Blank Pages Are Output - Epson AcuLaser C3000 Series User Manual

Areas are missing in the printed image

Cause
Your paper may be moist or
damp.
You may not be using the
correct type of paper for your
printer.

Completely blank pages are output

Cause
The printer may have loaded
more than one sheet at a time.
There may be no toner left in
the Toner cartridge.
The problem may be with your
application or interface cable.
What to do
This printer is sensitive to moisture
absorbed by the paper. The higher the
moisture content in the paper, the
lighter the printout. Do not store paper
in a humid or damp environment.
If the surface of your paper is too rough,
printed characters may appear
distorted or broken. EPSON special
paper or smooth, high-quality copier
paper is recommended for best results.
See "Available paper types" on page
272 for information on choosing paper.
What to do
Remove the paper stack and fan it. Tap
it on a flat surface to even the edges.
Then reload the paper.
If the message on the LCD panel or in
the EPSON Status Monitor 3 indicates
that the amount of toner is low, see
"Replacing a toner cartridge" on page
182.
Print out a status sheet. See "Printing a
Status Sheet" on page 227. If a blank
page is ejected, the problem may be
with the printer. Turn off the printer
and contact your dealer.
Troubleshooting
9
9
9
9
9
9
9
9
9
9
9
9
239