Chapter 8
Maintenance and Transportation
Replacement Messages
When you see the following messages on the LCD panel or the
window of EPSON Status Monitor 3, replace the appropriate
consumable products. You can continue to print for a short time
after a message appears, but EPSON recommends early
replacement to maintain print quality and extend the life of your
printer.
Note:
Do not replace the toner cartridge when the
appears. Toner remaining in the toner cartridge may spill out if you
remove the toner cartridge to replace it. Replace the toner cartridge when
the
LCD Panel Message
Worn Photoconductor
Worn Fuser
Worn Transfer Unit
Note:
To clear the warning, select
panel's Reset Menu.
180
Maintenance and Transportation
message appears.
Description
The photoconductor unit has reached the
end of its service life.
The fuser unit has reached the end of its
service life.
The transfer unit is near the end of its service
life.
message
from the control