The Printed Image Is Light Or Faint; The Non-Printed Side Of The Page Is Dirty - Epson AcuLaser C3000 Series User Manual

The Paper Size setting may be
incorrect.
There may be a problem with
the photoconductor unit.

The printed image is light or faint

Cause
Your paper may be moist or
damp.
The Toner Save mode may be
on.
There may be no toner left in
the toner cartridge.
There may be a problem with
the photoconductor unit.

The non-printed side of the page is dirty

Cause
Toner may have spilled onto
the paper feed path.
240
Troubleshooting
Make sure the correct paper size is set
in the Tray Menu on the control panel.
Replace the photoconductor unit. See
"Photoconductor Unit" on page 187.
What to do
Do not store your paper in a humid or
damp environment.
Turn off the Toner Save mode using the
printer driver or the printer's control
panel menus.
If the message on the LCD panel or in
EPSON Status Monitor 3 indicates that
the amount of toner left is low, see
"Replacing a toner cartridge" on page
182.
Replace the photoconductor unit. See
"Photoconductor Unit" on page 187.
What to do
Clean internal printer components by
printing three pages with only one
character per page.