Connecting the cables
Attention: To prevent damage to equipment, connect the power cords last.
If the server cables and connector panel have color-coded connectors, match the
color of each cable end with the color of the connector. For example, match a blue
cable end to a blue connector on the panel, a red cable end with a red connector,
and so on.
The following illustration shows the input/output (I/O) connectors on the rear of
the server.
Table 10. Connectors on the rear of the server
1
Ethernet transmit/ receive activity
LED (amber)
2
Ethernet link status LED (green)
3
Remote Supervisor Adapter II
SlimLine (Ethernet) connector
4
USB connectors 1 and 2
5
Ethernet connector
6
USB connectors 3 and 4
7
Video connector
8
Serial 1 (Com1) connector
9
Parallel connector
10
Serial 2 (Com2) connector
11
DC power LED
and
15
12
AC power LED
and
14
13
Power cord connector
Chapter 2. Installing optional devices
33