Completing The Installation; Reinstalling The Two-Piece Bezel - Lenovo ThinkServer TS100 Installation Manual

Completing the installation

To complete the installation, you must reinstall the two-piece bezel, reinstall the
side cover, connect all the cables and, for some devices, run the
Configuration/Setup Utility program. Follow the instructions in this section.

Reinstalling the two-piece bezel

To reinstall the two-piece bezel, complete the following steps:
1. Install the upper bezel:
30
ThinkServer TS100 Types 6431, 6432, 6433, 6434: Installation Guide
a. Insert the two right-side tabs on the upper bezel into the matching holes on
the right side of the chassis.
b. Rotate the upper bezel to the left side of the chassis and press the bezel
clips 1 into the matching indentations on the left side of the chassis until
the bezel clips snap into place.