Chapter 2. Installing Optional Devices; Installation Guidelines - Lenovo ThinkServer TS100 Installation Manual

Chapter 2. Installing optional devices

This chapter provides basic instructions for installing optional hardware devices in
the server. These instructions are intended for users who are experienced with
setting up Lenovo server hardware. If you need more detailed instructions, see the
User Guide on the ThinkServer Documentation DVD.

Installation guidelines

Before you install optional devices, read the following information:
v Read the safety information that begins on page v, the guidelines in "Working
v Observe good housekeeping in the area where you are working. Place removed
v When you install your new server, take the opportunity to download and apply
v Before you install optional hardware devices, make sure that the server is
v Observe good housekeeping in the area where you are working. Place removed
v If you must start the server while the cover is removed, make sure that no one is
v Do not attempt to lift an object that you think is too heavy for you. If you have
© Lenovo 2008, 2009. Portions © IBM Corp. 2008.
inside the server with the power on" on page 8, and "Handling static-sensitive
devices" on page 9. This information will help you work safely.
covers and other parts in a safe place.
the most recent firmware updates. This step will help to ensure that any known
issues are addressed and that your server is ready to function at maximum
levels of performance. To download firmware updates for your server, complete
the following steps.
Note: Changes are made periodically to the Lenovo Web site. The actual
procedure might vary slightly from what is described in this document.
1. Go to: http://www.lenovo.com/support.
2. Enter your product number (machine type and model number) or select
Servers and Storage from the Select your product list.
3. Select Servers and Storage from the Brand list.
4. From Family list, select ThinkServer TS100, and click Continue.
5. Click Downloads and drivers to download firmware updates.
working correctly. Start the server, and make sure that the operating system
starts, if an operating system is installed, or that a 19990305 error code is
displayed, indicating that an operating system was not found but the server is
otherwise working correctly. If the server is not working correctly, see Solving
problems for diagnostic information.
covers and other parts in a safe place.
near the server and that no tools or other objects have been left inside the server.
to lift a heavy object, observe the following precautions:
– Make sure that you can stand safely without slipping.
– Distribute the weight of the object equally between your feet.
– Use a slow lifting force. Never move suddenly or twist when you lift a heavy
object.
– To avoid straining the muscles in your back, lift by standing or by pushing
up with your leg muscles.
7