2.
Connect the USB cable that comes bundled
with the camera to the USB cradle and the
USB port of your computer.
UBB Cable
(Bundled)
_
UBB Port I
Connector
Mini-B
Connector
A
_
_
[.4z. ] (UBB) Connector
•
Orient the USB plug so it correctly
matches
the shape
of
the USB port when you connect
them.
•
Plug the USB cable into the ports securely,
as far as it will
go. Proper operation
is not possible
if connections
are not
correct.
,
°
5.
6.
Open the lens cover to turn on the camera and
then press [MENU].
•
Do not place the camera
on the USB cradle yet.
On the "Set Up" tab, select "USB" and then
press [,].
Use [A] and [V] to select "Mass Storage" and
then press [SET].
Close
the lens cover to turn off the camera
and then place the camera
onto the USB
cradle.
• Do not place the camera onto the USB cradle while it is
turned on.
• If you plan to transfer images from the camera's built-in
memory to your computer, make sure there is no memory
card loaded in the camera.
USING
THE CAMERA
WITH
A COMPUTER
236