Download Print this page

Advertisement

FILE MANAGEMENT
FILE MANAGEMENT
The file management capabilities of the camera make it
easy to keep track of images. You can protect files against
deletion, and even use its DPOF feature to specify images
for printing.
Folders
Your camera automatically creates a directory of image
storage folders in its built-in Flash memory or on the
memory card.
Memory Folders and Files
An image you record is automatically stored in a folder,
whose name is a serial number. You can have up to 900
folders in memory at the same time. Folder names are
generated as shown below.
Example: Name of the 100th folder.
100CASIO
Serial number (3 digits)
Each folder can hold files numbered up to 9,999.
Trying to store the 10,000th file in a folder causes the next
serially numbered folder to be created. Folder names are
generated as shown below.
Example: Name of the 26th file
C I M G 0 0 2 6 . J P G
Serial number (4 digits)
• The actual number of files you will be able to store on a
memory card depends on the image quality settings,
capacity of the card, etc.
• For details about the directory structure, see "Memory
Directory Structure" on page 142.
99
Extension

Advertisement

   Summary of Contents for CASIO EX-M20 - 3

  • Page 1: File Management

    FILE MANAGEMENT FILE MANAGEMENT The file management capabilities of the camera make it Each folder can hold files numbered up to 9,999. easy to keep track of images. You can protect files against Trying to store the 10,000th file in a folder causes the next deletion, and even use its DPOF feature to specify images serially numbered folder to be created.

  • Page 2

    FILE MANAGEMENT Use [ ] and [ ] to Protecting Files select “On”, and then Once you protect a file it cannot be deleted (page 97). You press [SET]. can protect files individually or you can protect all files in •...

  • Page 3

    FILE MANAGEMENT To protect all files in memory DPOF The letters “DPOF” stand for “Digital Print In the PLAY mode, press [MENU]. Order Format”, which is a format for recording on a memory card or other medium Select the “PLAY” tab, select “Protect”, and which digital camera images should be then press [ ].

  • Page 4

    FILE MANAGEMENT To configure print settings for a single Use [ ] and [ ] to specify the number of copies. image • You can specify up to 99 for the number of copies. Specify 00 if you do not want to have the image In the PLAY mode, press [MENU].

  • Page 5

    FILE MANAGEMENT To configure print settings for all images To turn on date stamping for the prints, press [DISP] so is displayed. 12 12 In the PLAY mode, press [MENU]. • To turn off date stamping for the prints, press [DISP] is not displayed.

  • Page 6

    FILE MANAGEMENT PRINT Image Matching II Exif Print Images include PRINT Image Matching Exif Print is an data (mode setting and other camera internationally supported, setup information). A printer that open standard file format supports PRINT Image Matching that makes it possible to reads this data and adjusts the printed capture and display vibrant image accordingly, so your images...

  • Page 7

    FILE MANAGEMENT Use the DPOF procedure on page 101 to Using USB DIRECT-PRINT specify the images in file memory that you want to print. Your camera supports USB DIRECT-PRINT, which was Use the USB cable that comes with the developed by Seiko Epson Corporation.

  • Page 8

    FILE MANAGEMENT Press the USB cradle IMPORTANT! [USB] button. • See the documentation that comes with your printer for information about print quality and paper settings. • This displays the print • Contact your printer manufacturer for information menu on the camera’s about models that support USB DIRECT-PRINT, monitor screen.

  • Page 9

    FILE MANAGEMENT Use [ ] and [ ] to Using the FAVORITE Folder select “Save”, and You can copy scenery shots, photos of your family, or other then press [SET]. special images from a file storage folder (page 142) to the •...

  • Page 10

    FILE MANAGEMENT NOTES To display a file in the FAVORITE folder • Copying an image file with the above procedure creates a 320 x 240-pixel QVGA-size image in the In the PLAY mode, press [MENU]. FAVORITE folder. • A file copied into the FAVORITE folder is Select the “PLAY”...

  • Page 11

    FILE MANAGEMENT NOTE To delete a file from the FAVORITE • Holding down [ ] or [ ] scrolls images at high folder speed. In the PLAY mode, press [MENU]. IMPORTANT! Select the “PLAY” tab, select “Favorites”, and • Note that a FAVORITE folder is created in the then press [ ].

  • Page 12

    FILE MANAGEMENT IMPORTANT! To delete all files from the FAVORITE • You cannot use the delete operations on page 97 to folder delete images from the FAVORITE folder. Performing the memory format operation (page 123), In the PLAY mode, press [MENU]. however, does delete FAVORITE folder files.

  • Page 13: Other Settings

    OTHER SETTINGS OTHER SETTINGS Turning the Key Tone On and Off (EX-S20) Configuring Sound Settings (EX-M20) Use the following procedure to turn the tone that sounds With the EX-M20, you can configure separate sounds for when you press a key on and off. startup, shutter release, and key operations.

  • Page 14

    OTHER SETTINGS Use [ ] and [ ] to change the setting, and To set the volume level then press [SET]. In the REC mode or the PLAY mode, press To do this: Select this setting: [MENU]. Select a built-in sound Sound 1 through Sound 5 Select the “Set Up”...

  • Page 15

    OTHER SETTINGS IMPORTANT! Specifying an Image for the Startup Screen • You can select any one of the following types of You can specify an image you recorded with the camera as image as the startup image. the startup screen image, which causes it to appear on the —...

  • Page 16

    OTHER SETTINGS Change the name of the file to one of the Configuring Power Down Image Settings following. With the Power Down Image feature, you can configure the Snapshot Image: ENDING.JPG camera so a specific image stored in camera image Movie Image: ENDING.AVI memory appears whenever you turn off power.

  • Page 17

    OTHER SETTINGS I To cancel Power Down Image settings IMPORTANT! • Only a snapshot (JPEG) or movie (AVI) file can be used as the power down image. Use the USB cable to connect the camera to • Note that the Power Down Image feature works only your computer (page 131).

  • Page 18

    OTHER SETTINGS Specifying the File Name Serial Number To do this for a newly saved file: Select this setting: Generation Method Store the last file number used and increment it, regardless of whether Use the following procedure to specify the method for files are deleted or whether the Continue generating the serial number used for file names (page 99).

  • Page 19

    OTHER SETTINGS Press [DISP]. Using the Alarm • You could press [SET] in place of [DISP] if you want You can configure up to three alarms that cause the to configure the alarm without an image. camera to beep and display a specified image at the time you specify.

  • Page 20: Setting The Clock

    OTHER SETTINGS Stopping the Alarm Setting the Clock When an alarm time is reached while the camera is turned Use the procedures in this section to select a Home Time off, the alarm will sound for about one minute (or until you Zone, and to change its date and time settings.

  • Page 21

    OTHER SETTINGS Use [ ] and [ ] to select “City”, and then To set the current time and date press [ ]. In the REC mode or the PLAY mode, press Use [ ], [ ], [ ], and [ ] to select the [MENU].

  • Page 22

    OTHER SETTINGS Changing the Date Format Using World Time You can select from among three different formats for You can use the World Time screen to view a time zone display of the date. that is different from the home time zone when you go on a trip, etc.

  • Page 23

    OTHER SETTINGS To configure World Time settings Use [ ] and [ ] to select the city you want, and then press In the REC mode or the PLAY mode, press [SET]. [MENU]. • This displays the current Select the “Set Up” tab, select “World Time”, time in the city you and then press [ ].

  • Page 24

    OTHER SETTINGS To configure summer time (DST) After the setting is the way you want, press [SET]. settings • This displays the current time in accordance with your setting. In the REC mode or the PLAY mode, press [MENU]. Press [SET] again to exit the setting screen. Select the “Set Up”...

  • Page 25

    OTHER SETTINGS Changing the Display Language Formatting Built-in Memory You can use the following procedure to select one of ten Formatting built-in memory deletes any data stored in it. languages as the display language. IMPORTANT! • Note that data deleted by a format operation cannot In the REC mode or the PLAY mode, press be recovered.

  • Page 26

    OTHER SETTINGS Select the “Set Up” tab, select “Format”, and then press [ ]. Use [ ] and [ ] to select “Format”, and then press [SET]. • To exit the format operation without formatting, select “Cancel”.

This manual also for:

Ex-s20 - 3, Exilim ex-m20, Exilim ex-s20

Comments to this Manuals

Symbols: 0
Latest comments: