Formatting
built-in
memory
deletes
any data stored
in it.
•
Note that data deleted
by a format operation
cannot be
recovered.
Check to make sure you do not need any of the
data in built-in
memory
before you format
it.
•
Formatting
built-in
memory
also deletes
the following.
-
Face Recognition
data saved with Record
Family
-
Protected
images
-
FAVORITE
folder images
-
BEST
SHOT
mode user setups
-
Startup
screen
•
Make sure that the battery
is charged
fully before starting
a
formatting
operation.
Formatting
may not be performed
correctly
and the camera
may stop operating
normally
if the
camera
powers
down while formatting
is in progress.
•
Never open the battery
cover while formatting
is in
progress.
Doing so can cause the camera to stop operating
normally.
,
.
3.
,
Check to make sure there is no memory card
loaded in the camera.
• If thereis a memorycard loadedin the camera,removeit.
Press [MENU].
On the "Set Up" tab, select "Format"
and then
press [,].
Use [A] and [V] to select "Format"
and then
press [SET].
This formats
built-in
memory
•
To exit the format operation
without
formatting,
select
"Cancel".
•
Entering
the PLAY
mode after formatting
the built-in
memory
will cause the message
"There
are no files." to
appear.
OTHER
SETTINGS
218