You can configure
the camera to display
a startup
screen of an
image you recorded,
whenever
you turn it on.
•
Even if you configure
startup
screen
settings
in the PLAY
mode,
the startup
screen does not appear
when turn on the
camera
by pressing
[_]
(PLAY).
1. Press [MENU].
2.
On the "Set Up" tab, select "Startup"
and then
press [,].
3. Use [_1] and [1_] to scroll through the images
until the one you want to use as the startup
screen is on the monitor screen.
4. Use [A] and [Y] to select the setting you want
and then press [SET].
Use the selected
image as the
On
startup
screen
Turn off the startup
screen
Off
_NOTE
• The following
are the types
of images
that you can select
for the startup
screen.
-
Special
startup
screen
images
built into the camera
-
Snapshots
- Audio
snapshots
(Audio
does not play.)
• Only one startup
screen image can be in effect
at any time.
To change
the startup
screen to another
image, simply
overwrite
the current
image with the new one.
• Formatting
built-in
memory
(page 218) will delete the
current
startup
screen
image.
OTHER
SETTINGS
2O8