Displaying The Measurements Of A Figure - Casio ClassPad 330 User Manual

Displaying the Measurements of a Figure

You can display measurements on the Geometry application window. The measurements
change dynamically as you manipulate the figure.
A List of [Measurement] Submenu Commands on the [Draw] Menu
Names of Commands
Angle
Supplementary Angle
Area
Circumference
Coordinates
Direction
Equation
Length
Radius
Slope
Note
There are three ways to display measurements while you work on the Geometry application
window. The following examples show you each method.
Method 1: Selecting [Measurement] from the [Draw] menu
(1) Tap G and select elements AB and AC.
(2) Tap the u button to the right of the toolbar.
This displays the measurement box, which indicates
•
the specified angle.
8-2-22
Drawing Figures
Meanings of Each Command
Angle between two lines
Supplementary angle of extended lines
Area of selected figure
Circumference of selected figure
Coordinates of selected point
Direction of line or vector
Equation of selected curve
Distance between two points, or length of line
Radius of circle
Slope of line or vector
20060301