Configuring Presentation Preferences - Casio ClassPad 330 User Manual

11-6 Configuring Presentation Preferences

You can use the procedure below to configure various Presentation application preferences.
u ClassPad Operation
(1) Tap O, and then [Presentation].
• This displays the Presentation dialog box.
(2) Use the Presentation dialog box to configure the preferences you want.
To do this:
Send hard copy data generated by tapping
h to an external device
Save hard copy data internally as
Presentation data
Specify the page change speed for Auto
Play
Capture the upper half of the screen when
h is tapped
Capture the entire screen when h
is tapped
Turn on repeat playback of files during
Auto Play
Turn off repeat playback of files during
Auto Play
Turn on page number display during
playback and editing
Turn off page number display during
playback and editing
• Items marked with an asterisk (*) are initial defaults. The initial default [Play Speed]
setting is 4.
• Selecting [Disabled] on the Presentation application initial screen will cause the
[Screen Copy To] to change automatically to [Outer Device].
** <File name> will show the name of the presentation file.
(3) To close the dialog box and apply its settings, tap [Set]. To close the dialog box without
applying its settings, tap [Cancel] or the
box. To restore all the settings on the dialog box to their initial defaults, tap [Default].
11-6-1
Configuring Presentation Preferences
20060301
Do this:
Select [Outer Device].*
Select "P1:<File name>**" through
"P20:<File name>**" for [Screen Copy To].
Specify a [Play Speed] value from 1
(fastest) to 10 (slowest).
Select the [Half Screen Capturing] check
box.
Clear the [Half Screen Capturing] check
box.*
Select the [Repeat] check box.
Clear the [Repeat] check box.*
Select the [Page Number] check box.*
Clear the [Page Number] check box.
button in the upper right corner of the dialog