Displaying A Graph In The Inactive Screen; Before Displaying A Graph In The Inactive Screen; Copying The Active Graph To The Inactive Screen - Casio fx9750G User Manual

11-4

Displaying a Graph in the Inactive Screen

There are two methods you can use to display a graph in the inactive screen. You
can copy a graph from the active screen to the inactive screen, or you can move the
graph from the active screen to the inactive screen. In both cases, you must first
draw the graph in the left-side active screen.
k k k k k Before Displaying a Graph in the Inactive Screen
After drawing a graph in the active screen, press K, and the Dual Graph function
menu appears at the bottom of the display.
P.159
k k k k k Copying the Active Graph to the Inactive Screen
Use the following View Window parameters:
Assume that the function being graphed is stored in memory area Y1.
K
1 (COPY) .... Copies active graph to inactive screen
2 (SWAP) .... Switches active screen and inactive screen
3 (PICT) ...... Picture function
Example To draw the graph for
the inactive screen
Active (Left) Screen
View Window parameters
1 2 3 4 5
1 2 3
= ( + 1) ( – 1) on the active screen and
y x x x
Inactive (Right) Screen
View Window parameters
Draw the graph in the active
screen.
6(DRAW)
6
4 5 6
195