Viewing Regression Calculation Results; Residual Calculation - Casio ClassPad 330 User Manual

Viewing Regression Calculation Results
To view regression calculation results, tap [Calc] on the menu bar and then tap the type of
calculation results you want.
To view these calculation results:
Linear regression
Med-Med
Quadratic regression
Cubic regression
Quartic regression
Logarithmic regression
Exponential regression (
Exponential regression (
Power regression
Sinusoidal regression
Logistic regression
• You can also use the [DispStat] option to display the last calculated statistical results. For
details about regression calculation results, see "7-5 Graphing Paired-Variable Statistical
Data".
Residual Calculation
Residual calculation calculates the distance (residual) between the regression model and an
actual plotted point (
u ClassPad Operation
(1) m I
(2) Input the data you want into a list.
(3) Tap [Calc] and then [Linear Reg].
(4) On the dialog box that appears, tap the [Copy Residual] down arrow button, and then
select [On] or the list into which you want to copy the residual values.
• Values assigned to the "residual" system variable shows the vertical distances between
actually plotted points and the regression model.
• A positive value indicates a plot that is higher than the regression model, while a negative
value indicates a plot that is lower.
• Whenever the [Copy Residual] setting is configured as described above, the ClassPad
automatically assigns residual data to a system variable named "residual" when you
perform a regression calculation. You can use the following procedure to view the current
"residual" system variable values.
7-7-3
Performing Statistical Calculations
y a e
b x
·
= · )
y a b
x
= · )
y
-coordinates) during regression calculations.
20060301
Tap this option:
Linear Reg
MedMed Line
Quadratic Reg
Cubic Reg
Quartic Reg
Logarithmic Reg
Exponential Reg
abExponential Reg
Power Reg
Sinusoidal Reg
Logistic Reg