Using the Fill Sequence Command
The Fill Sequence command lets you set up an expression with a variable, and input a range
of values based on the calculated results of the expression.
u To input a range of values using Fill Sequence
Example: To configure a Fill Sequence operation according to the following parameters
Expression:
Change of
Step:
Input Location:
(1) On the [Edit] menu, tap [Fill Sequence].
(2) Use the dialog box that appears to configure the Fill Sequence operation as described
below.
Parameter
Expr.
Var.
Low
High
Step
Start
13-4-9
Editing Cell Contents
x
1/
x
Value: From 1 to 25
1
Starting from A1
Input the expression whose results you want to input.
Specify the name of the variable whose value will change with each
step.
Specify the smallest value to be assigned to the variable.
Specify the greatest value to be assigned to the variable.
Specify the value that should be added to the variable value with
each step.
Specify the starting cell from which the results of the expression
should be inserted.
20060301
Description