Control Panel Settings - Epson 850 User Manual

Specifications
Color and black
printing

Control Panel Settings

Changing control
panel settings
• EPSON Stylus PRO
• EPSON Stylus COLOR 500
• EPSON Stylus COLOR II
• LQ-860
• LQ-2550
You can change the following default settings from the printer's
control panel:
Setting
Print direction
Font
Pitch
I/F mode
Auto I/F wait time
Software
Auto CR (IBM mode only) Off, On
AGM (IBM mode only)
Character table
International character set
for italic table
Auto line feed
Network I/F mode
Loading position
Economy
Parallel I/F transfer rate
Follow these steps to change the settings listed above:
1. Make sure the printer is turned off and has paper loaded.
2. Hold down the
X
button. The printer prints a summary of instructions for
changing settings and choosing a language for the instructions.
3. Press the X color cleaning button to print a list of current settings
(indicated with arrows) and additional instructions.
4. After you make the changes you want, turn the printer off to save
the settings. The settings remain in effect until you change them
again.
D-8
Options
Auto, Bi-D, Uni-D
Courier, Roman, Sans Serif, Prestige, Script,
Roman T, Sans Serif H, Draft
10 cpi, 12 cpi, 15 cpi, 17.1 cpi, 20 cpi,
Proportional
Auto, Parallel, Serial, Option
10 seconds, 30 seconds
ESC/P 2, IBM X24E
Off, On
PC437, PC850, PC860, PC861, PC863, PC865,
Abicomp, BRASCII, Roman 8, ISO Latin 1
Italic U.S.A., Italic France, Italic Germany, Italic
U.K., Italic Denmark 1, Italic Sweden, Italic Italy,
Italic Spain 1
Off, On
Off, On
8.5 mm, 3 mm, Others
Off, On
Fast, Normal
color cleaning button and press the Ppower