Fixing Paper Problems - Epson 850 User Manual

Your printer icon doesn't appear in the Chooser (Macintosh).
Possible cause
Your Macintosh has
extension conflicts.
Your application program can't open your image file (Macintosh).
Possible cause
Not enough memory is
allocated to the application.
The "SC 850 (or SC 850AT) cannot be used" message appears (Macintosh
Possible cause
The printer software has
been corrupted.
Your printer doesn't print correctly as a remote printer (Windows NT).
Possible cause
You may need to use a
different network path and
printer port.
Solution
Disable Quick Draw GX in the Extensions Manager. Make sure
EPSON Monitor3 and SC 850 or SC 850AT are enabled, and then
restart your Macintosh.
Solution
Highlight the program icon and select Get Info from the File menu,
then increase the memory allocated to the application.
Solutions
Remove and reinstall the printer software as described on
page 6-18. Then, in the Extensions Manager, disable Quick Draw
GX, enable EPSON Monitor3 and SC 850 or SC 850AT, and restart.
Solution
Select a different printer port in the printer's Properties window
and enter the new network path to your printer at the DOS prompt.
Then restart your computer. See your Windows NT documentation
for instructions on changing the printer port and network path.

Fixing Paper Problems

To avoid most paper handling problems,:
Use smooth, high-quality media designed for ink jet
printers that meets the media specifications in Appendix D.
Follow all loading and handling instructions included with
the media.
Load the media with the printable side face up as described
on the Start Here card and in Chapter 2.
If you have any paper problems, check here for solutions.
6-13
Troubleshooting
.
)