Canon POWERSHOT SD400 DIGITAL ELPH User Manual page 149

/
o
computer before installing the driver and software. If this happens,
please refer to the Troubleshooting section of the Software Starter
Guide.
• Even when system requirements are met, not all computer functions
can be guaranteed, o
• You do not need to turn off the camera or computer power when
o
e
making a USB connection. _,,
Please refer to your computer's manual for information regarding the
location of the USB port. °O
You are recommended to use a fully charged battery pack or the AC 3
Adapter Kit ACK-DC10 (sold separately) to power the camera when
connecting to a computer (p. 18).
Windows
installthe driver and the softwareapplications bundled
onthe CanonDigitalCameraSolution Disk(firsttime
only).
Please see the Software Starter Guide for the installation procedures.
Usethe suppliedinterfacecable to connect t he
computer's USBportto thecamera'sDiGiTAL terminal.
147