Canon POWERSHOT SD400 DIGITAL ELPH User Manual page 195

Function
o
_(_1
_(_1
_(_1
Page
Evaluative -
Metering
Method Center-WeightedAverage - - p. 94
Spot - O O O -
ExposureCompensation - o( 7_ A 0 (7)p. 95
Long Shutter - - p. 95
White Balancelu) _ O A O p. 98
Photo Effect - A O (l°; _.101
ISO Speed -(Y) _(_) _(_) _(yl _.109
AutoRotate - _.110
* Default setting OSetting available ASetting canonlybeselected f orthefirstimage.
(Shaded A rea): Settingis memorized e venwhenthecamera poweris shutoff.
Withthe exceptionof the [Date/Time],[Language] a nd[VideoSystem]settings,allthe
othermenusettingsand changes madewiththe camerabuttonscan be resetto the default
valuesina single operation(p. 59).
(1) (2) The resolutions and frame rates for the '_ (Movie) mode are as follows.
640x 480 pixels
Resuiutiun _ 320x 240 pixels O -
160x 120 pixels - O
LqT='r_ 60 frames!sec. - o -
Frame Rate _ 30 frames!sec.
15 frames!sec, o
(3) The default flash setting is Auto with Red-Eye Reduction in the _ _ _ _ modes,
Auto in the _ mode.
- When the flash fires in _ mode, the camera will automatically use Slow Synchro mode.
(4) Youcannot switch betweenthe Macro/infinity modes when the camerais in the _ mode.
(5) AF cannot be selected in the _ mode.
(6) Can be set during shooting (only in Standard mode).
(7) Exposure compensation not available in _ or _ modes.
(8) This cannot be set when the Photo Effect is set to Sepia or B/W.
(9) Automatically set by the camera.
(10)The Photo Effect cannot be set in the _ mode.
193