Canon Digital Camera
User Guide for Camera-to-Camera Data Transfer
Table of Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Registering Your Camera Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Registering Target Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Connecting Cameras via a Wireless Connection . . . . . . . . . . . . . . . . . . 3
Transferring Images One by One . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Transferring Ordered Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Ending the Wireless Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Trademark Acknowledgments . . . . . . . . . . . . . . . . . . . . . . 6
Introduction
If you upgrade the firmware of your PowerShot SD430 DIGITAL ELPH WIRELESS/DIGITAL
IXUS WIRELESS camera, it will be possible to transfer images between cameras* via a wireless
connection without using a PC.
This guide will explain procedures for transferring images via a wireless connection. For
guidance in the use of the camera, safety precautions and radio wave warning, please refer to
the Camera User Guide.
* Image transfer is only possible between PowerShot SD430 DIGITAL ELPH WIRELESS/DIGITAL IXUS WIRELESS cameras
with upgraded firmware.
* Images are transferred from one camera to another camera. Images cannot be transferred between more than 2 cameras.
1

   Also See for Canon Powershot SD430 Digital ELPH Wireless

   Related Manuals for Canon Powershot SD430 Digital ELPH Wireless

   Summary of Contents for Canon Powershot SD430 Digital ELPH Wireless

  • Page 1

    Camera User Guide. * Image transfer is only possible between PowerShot SD430 DIGITAL ELPH WIRELESS/DIGITAL IXUS WIRELESS cameras with upgraded firmware. * Images are transferred from one camera to another camera. Images cannot be transferred between more than 2 cameras.

  • Page 2: Transferring Images Via A Wireless Connection

    Transferring Images via a Wireless Connection Registering Your Camera Name First, select a name for your camera and register it. Slide the mode switch to (Playback) (Wireless) Menu [Set Camera Name] Refer to the Camera User Guide for your camera for details on Menu operation.

  • Page 3: Connecting Cameras Via A Wireless Connection

    When the name of the target camera and [Registration completed] are displayed, press If the name is already registered, [Already registered] will be displayed. If you have failed to register, go back to Step 1 and repeat the procedure. Connecting Cameras via a Wireless Connection Connect your camera to the registered target camera via wireless.

  • Page 4: Transferring Ordered Images

    Transferring Images One by One You can transfer images one by one to a target camera connected via a wireless connection. Confirm that the cameras are connected via a wireless connection. For instructions on how to connect the cameras via a wireless connection, please refer to Connecting Cameras via a Wireless Connection (p.

  • Page 5: Ending The Wireless Connection

    Select [Transfer] and press If you have not selected the images for transfer order in advance, specify the images with [Order] or [Mark all] and select [Transfer]. Transfer of images will begin. The wireless lamp and the button will blink blue. The transferring camera will display [Transferring] and the receiving camera will display [Receiving].

  • Page 6: Troubleshooting

    Troubleshooting Camera cannot be registered or wireless connection cannot be selected. Camera is in shooting mode Change to Playback mode Unable to register the target camera in your camera. Registration limit exceeded in [Target A maximum of 7 new target devices can be Device] registered in [Target Device].

  • Page 7

    CDP-E055 ©2006 CANON INC.

This manual also for:

Digital elph, Digital ixus

Comments to this Manuals

Symbols: 0
Latest comments: