Canon POWERSHOT SD400 DIGITAL ELPH User Manual page 173

Hide thumbs Also See for POWERSHOT SD400 DIGITAL ELPH:
Table of Contents

Advertisement

'_ If the battery is used in cold regions (0 °C/32 °F or lower), you are
recommended
to carry a spare lithium battery (CR123A or DL123).
Keep the spare battery warm in your pocket until immediately
before
using it, and exchange
it frequently with the battery in the flash.
,, Remove the battery from the flash and store it in a dry and cool
location if you will not use it for extended
periods.
Leaving it in the
flash could lead to the battery leaking and damaging
the flash.
,, Fasten the attachment
screws securely
so that they do not loosen.
Failure to do so may lead to the dropping
of the camera and flash
resulting
in damage
to both.
,, Before affixing the bracket to the flash, check that the lithium battery
(CR123A or DL123)is
installed.
,, To illuminate the subjects properly,
install the flash so that it is up
against the side of the camera and parallel with the camera's
front
panel.
,, A tripod can be used even when the flash is attached.
/
171

Advertisement

Table of Contents
loading

This manual is also suitable for:

Digital ixus 50Digital elph

Table of Contents