Canon EOS 60D Instruction Manual page 42

Basic Operation
0 Making Selections With the Quick control Dial
(I) After pressing a button, turn the
<0> dial.
When you press a button such as
<AF>,
<DRIVE>, or <ISO>, the respective
function remains selected for 6 seconds
((_6). During this time, you can turn the
<0> dial to set the desired setting.
When the function selection turns off or if
you press the shutter button halfway, the
camera will be ready to shoot.
_ Use this dial to select or set the AF
mode, drive mode, ISO speed,
metering mode, AF point, etc.
(2) Turn the <0 > dial only.
While looking at the viewfinder or LCD
panel, turn the <0> dial to set the
desired setting.
_ Use this dial to set the exposure
compensation amount, the aperture
setting for manual exposures, etc.
Using the UNLOCK button
in Creative Zone modes, you can set the [_': Lock 0] menu setting to
[Enable] to prevent the Quick Control Dial from inadvertently turning
and changing the following settings:
• Exposure compensation (When shooting mode is P/Tv/Av.)
• Aperture setting with manual exposures
• Aperture setting with bulb exposures
With [Lock O: Enable] set, the <UNLOCK>button below the Quick
Control Dial enables the [Lock 0] setting to be canceled temporarily
so that you can change the settings above. Press the < UNLOCK > button
((_4), then turn the <0> dial. (c_16 in movie mode.)
42