Auto Lighting Optimizer - Canon EOS 60D Instruction Manual

Auto Lighting Optimizer*
If the image comes out dark or the contrast is low, the brightness and
contrast can be corrected automatically. The default setting is [Standard].
With JPEG images, the correction is done when the image is captured.
Select [Auto Lighting Optimizer].
_ Under the [t_:] tab, select [Auto
Lighting Optimizer], then press
<_>.
_Set the correction setting.
_ Select the desired setting, then press
<_>.
_ Take the picture.
_ The image will be recorded with the
brightness and contrast corrected if
necessary.
Without correction With correction
U
If [..,l_.C.Fn II -3: Highlight tone priority] is set to [1: Enable], the Auto
Lighting Optimizer will be set automatically to [Disable] and you cannot
change this setting.
Depending on the shooting conditions, noise might increase.
if a setting other than [Disable] is set ana you use exposure
compensation, flash exposure compensation, or manual exposure to
darken the exposure, the image might still come out bright, if you want a
darker exposure, set this to [Disable] first.
n Basic Zone modes, [Standard] is set automatically.
101