Pf Motor Assembly Removal - Epson 440 Service Manual

EPSON Stylus Color 600 Service Manual
3.2.5.4

PF Motor Assembly Removal

1. Removing the upper housing. (Refer to section 3.2.1)
2. Removing "Waste Ink Pad Assembly". (Refer to section 3.2.4)
3. By referring the figure below, remove the specified gears from the mechanism:

"GEAR, 67.2"

"COMBINATION GEAR, 8, 14.4"

"COMBINATION GEAR, 8.8, 21.6"

"GEAR, 36"
4. Remove 2 hexagonal lock nut and remove "MOTOR, ASSEMBLY, PF".


When removing the PF Motor, first, slightly pulling out the PF Motor from the frame and slide the
motor shaft to a larger cut out of the frame and remove it.


Be careful with the routing direction of the cable from the PF motor.
3-16
WORK POINT
Figure 3-14. PF Motor Removal
Rev. A