Preset Price Open; Listing Capacity Open - TEC MA-1350-1 SERIES Owner's Manual

Preset Price Open

When an open price must be entered through a Preset-price Department, use the [PR OPEN] (or [OPEN])
key to release the preset-price status temporarily.
PR
Depress (or
OPEN
NOTES: 1. A price entry by Preset Price Open cannot be repeated.
2. The Preset Price Open entry is not possible for any PLUs.

Listing Capacity Open

When an item entry price exceeds the Listing Capacity (programmed for each department) in sale entries,
use the [LC OPEN] (or [OPEN]) key to release the Listing Capacity. The Listing Capacity for the department
or PLU will be exceeded with two higher digits for that entry only. (If a price of further high digits must be en-
tered, call for Manager Intervention. Refer to the chapter 1. Operations in "MGR" Mode on page 1 in
Manager's Guide.)
LC
Depress (or
OPEN
NOTE: When the [OPEN] key is used instead of [LC OPEN], a repeat entry is not possible (because the
[PR OPEN] key function also becomes effective).
OPEN ) prior to or any time during the entry sequence of the following opera-
tions:
Entry of One Department Item
Department Quantity Extension
Department SPP
Other Income Department Entry
Single-item Department Entry
) prior to or any time (before the final key at the latest) during the entry
OPEN
sequence of the following operations:
Entry of One Department Item
Department Repeat Entry (NOTE)
Department Quantity Extension
Department SPP
Single-item Department Entry
Other Income Department Entry
Entry of One PLU Item
PLU Repeat Entry (NOTE)
PLU Quantity Extension
PLU SPP
Single-item PLU Entry
- 29 -
EO1-11126
MA-1350-1 SERIES