Toshiba Tec; Listing Capacity Release - TEC MA-1350-1 SERIES Owner's Manual

OPERATION
Credit Balance (over-
subtraction of the sale
by [DOLL DISC], [VND
CPN], [STR CPN] and
[VOID] keys)
Negative Department
or negative PLU Entries
Negative-balance Sale
Finalization by Non-
cash Media Kyes.
NOTES: 1. As for the initial status of the respective operation items shown above, MGR position "Re-
quired" status is programmed only to "Credit Balance".
2. "Credit Balance" is not applied to the [RTN MDSE] key, negative department, and negative
PLU.

Listing Capacity Release

Listing Capacities (amount limits) may be programmed on Departments (each open-price PLU is ruled by the
Listing Capacity of its link Department) and Tender Media. These LCs (Listing Capacities) are programmed to
check an excessively high amount entry by cashier's mistake at the earliest stage. Guide your cashiers as in
the following procedure:
1) During sale entries by a cashier, an error occurs when a Department or PLU item has been entered, or
a media key has been depressed.
2) The cashier clears the error by the [C] key. The cashier confirms the amount and operates the item
again.
3) If the same error occurs again, the cashier attempts to enter the amount using the [LC OPEN] or
[OPEN] key.
4) If the operation results in an error again, it means that the amount still cannot be entered by the [LC
OPEN] or [OPEN] key function.
5) The cashier calls for Manager Intervention.
The procedure thereafter is the same as Steps 2) to 7) for the Items programmed to require Manager Inter-
vention on the preceding page.
Reference: For reading the Listing Capacity of each Department:
For setting the Listing Capacities of specific Departments:
For reading the Listing Capacity of each Tender Media Key:
For setting the Listing Capacities of the specific Tender Media Keys:
Operations and Manager Intervention Status
MGR Position
Not required
Chapter 5. Program Data Verification — Department LC and Status Read
Ask your TOSHIBA TEC representative.
Chapter 5. Program Data Verification — Other Programmed Data Read
Chapter 4. Changing the Programmed Data — Listing Capacity Setting for the
Tender Media
Required
As for the status
change, ask your

TOSHIBA TEC

representative.
- 2 -
MA-1350-1 SERIES
Reference
EO1-11126