Control Lock And Control Keys; Control Keys; Control Lock - TEC MA-1350-1 SERIES Owner's Manual

5. Control Lock and Control Keys

Control Keys

There are four types of Control keys: the REG key, the MGR key, the MA key, and the S key.
REG Key:
MGR key:
MA Key:
S Key:

Control Lock

The Control Lock has seven effective positions for different modes of operation, which are accessed by the
appropriate Control Keys.
MGR
MA
MGR
X
REG
REG
OFF
SET
The REG key is used by the cashier or clerk who operates ordinary transaction
entries. This key can access the positions of OFF and REG of the Control Lock.
The MGR key is used by the store manager. This key can access the positions
of OFF, REG, X, and MGR.
The MA key is used by the owner who will daily supervise the collection of
money and printout of transactions recorded by the register. This key is also
used when programming the register. This key can access the positions of SET,
OFF, REG, X, MGR, - and Z.
The S key is used by the service person from your TOSHIBA TEC
representative to access any position. To prevent programmed data and sales
data from being changed or cleared by mistake, do not use this key without
instructions from your TOSHIBA TEC representative.
(position)
SET ............... The register allows programming and training operations.
OFF ............... Nothing appears on the display in this position. However,
-
REG .............. Transaction entries are carried out in this mode. Displays
Z
X ................. The sale totals in memory can be read (X reports) and
MGR .............. This position allows to enter operations requiring Man-
- .................. This is the "Negative Mode" position, which makes en-
Z ................. All the resettable totals and their respective counters in
The keys may be inserted or pulled out at the "OFF" or "REG" position.
(function)
the power is being supplied to the register.
the current time while no entries are under way.
the programmed data can be verified in this position.
ager Intervention as well as all ordinary transaction en-
tries to be carried out in the "REG" mode.
tered data processed reversely to the REG or MGR
mode. It is used to cancel or adjust sales data already
finalized.
memory will be read and reset in this position (Z reports)
- 4 -
EO1-11126
MA-1350-1 SERIES