TEC MA-516-100 SERIES Owner's Manual page 93

Setting Foreign Currency Exchange Rate:
Set the exchange rate of the currency. Change the rate daily, if necessary.
Condition: Any time outside a sale. Must be signed off in the Cashier Signing
Method.
Programming Procedure:
Use the MA Key to turn the
Control Lock to the "SET" position.
Exchange Rate; max. 10 digits, 0.000001 to 9999.999999
NOTES 1. Obtain the rate by calculating in the subsidiary currency unit values for both the domestic and
the foreign currency. (In case of calculating the rate from the domestic to a foreign currency
with the same zero-suppress form, such as from U.S. $ to French Franc, it will be no problem.
However, in case of exchanging from a domestic currency such as U.S. $ to a foreign
currency such as Japanese yen, this rule must be obeyed; otherwise a wrong rate will result.)
2. Calculate the required foreign currency value equivalent to the domestic currency value
"1". Then the obtained value is the Exchange Rate value to be entered in the setting operation
above.
Example)
3. If "0" is set as the exchange rate, that key cannot be used in sale entries.
X
MGR
REG
OFF
SET
.
.
.
.
Domestic Currency is US$:
1¢ = XXXX . XXXXXX
= XXXX . XXXXXX
= XXXX . XXXXXX
etc.
Enter this value as the foreign currency exchange rate.
- 89 -
MA-516-100 SERIES
-
Z
CUR1
NOTE 1, 2
CUR2
CUR3
CUR4
centimes (French Franc)
pfennigs (Deutsche Mark)
yen (Japanese Yen)
EO1-11116