TEC MA-516-100 SERIES Owner's Manual page 52

Department Quantity Extension (Multiplication):
When more than three or four items are to be entered with the same Department and price, the Quantity Extension
(multiplication) is quicker than the Repeat Entry.
If an error occurs here:
Possible cause of error:
• Exceeding the digit limit
.....
@/FOR
Quantity; NOTE 1
max. 6 digits
0.001 to 999.999
•
3 digits for inte- 3 digits for deci-
mal (max.)
ger (max.)
Required only for any
decimal portion entry.
Examples) 123:
23.4:
0.234: (
NOTES 1. When the Quantity is a 1-digit integer (1 to 9) and a Preset-price Department Key is to follow,
2. The product obtained by Quantity Extension cannot be repeated.
3. The decimal portion of the Quantity entry is processed down to the 2 digits below the decimal
4. You can select the rounding process of the fractions of the product (result of multiplication)
Open-price Department
.......
Unit Price;
max. 6 digits
Preset-price Department
(
DPT
SHIFT
To enter sale item of
the Department Nos.
21 to 40.
2 3
1
3 .
2 4
0 ) . 2 3 4
the [@/FOR] key is omissible.
point. The fraction rounding at this time is fixed to ROUND OFF.
-- ROUND OFF (initial setting), ROUND UP, or ROUND DOWN. (Refer to Chapter "22.
System Option Setting" Address 2 - Bits 1 and 2 on page 120.)
Depress the [DPT SHIFT] key at either position to
enter a sale item of the Department Nos. 21 to 40.
(
Product must not
Dept.
exceed 7 digits.
If an error occurs here:
Possible cause of error:
• Exceeding the LC of the Department
Check the Unit Price.
See Listing Capacity Open.
• Product exceeding 7 digits.
Check the Quantity and Unit Price.
• Department requiring Manager Intervention.
Ask the manager to turn the Control Lock to
MGR.
) (
Product must not
Dept.
exceed 7 digits.
If an error occurs here:
Possible cause of error:
• Product exceeding 7 digits.
Check the Quantity.
• Department requiring Manager Intervention.
Ask the manager to turn the Control Lock to
MGR.
- 48 -
EO1-11116
MA-516-100 SERIES
)
)