TEC MA-516-100 SERIES Owner's Manual page 148

MGR
X
REG
OFF
SET
3
Remove the old Ribbon Cassette by pulling it in the
direction of the arrow mark.
4
Install a new one as shown in the figure. After installing
the Ribbon Cassette, turn the knob of the Ribbon Cas-
sette in the direction of the arrow mark several times to
remove the slack on the ribbon.
5
After replacing the Ribbon Cassette, attach the Printer
Cover.
6
Turn the Control Lock to the REG position using the
Control Key, then depress the [#/NS] key to check the
print condition.
Z
- 144 -
EO1-11116
MA-516-100 SERIES